High Precision Tire Mold EDM Machine For Cars, Bus Vehicles, Motorcycles Tire Molds

Specifications

Detail Introduction

Jinan zhengri Science co., LTD.

Tel:13963988986 Fax: 86-531-88726846  E-mail:[email protected] Http://www.jnzrkj.com

The use of 800D segmented tire mold EDM machine
800D is a dedicated tire mold EDM machine for tire molds of cars, BUS vehicles, motorcycles, bicycles, and agricultural vehicles. It is suitable for segmented tire molds and two-part tire molds with a rotation diameter of less than 1200mm. The worktable disc of the machine tool has a box structure with high stability and precision. The column is inclined at 15 degrees. Such an inclination can provide a good channel for the discharge of the EDM machined iron. The spindle head is small in size, and the spindle head can enter the tire mold cavity with a diameter of 380mm or more for processing. The 800D oil tank can be raised and lowered, and the tire mold diameter of 400mm or more can realize oil immersion processing. The heat dissipation performance is good, it is not easy to catch fire, and the safety is improved. At the same time, oil immersion processing makes the surface finish of EDM processing better. The lifting oil tank, bed body oil tank, and oil storage tank constitute a three-stage precipitation, better precipitation of iron pins, and better heat dissipation.

The 800D tire mold EDM machine has high precision and heavy load-bearing mold weight. It is suitable for processing segmented tire molds with a diameter of less than 1250mm.

D800.Technical Parameters
DATE:2020.10.			No.:
Model	Unit	D800 tire mold edm
Beam stroke (with digital display)	mm	470
Column stroke (with digital display)	mm	370
Diameter of table chuck	mm	800
Maximum weight of workpiece	kg	1500
Oil tank		Electric lift
Workpiece rotation diameter	mm	350~1400
Minimum workpiece diameter	mm	350
Maximum workpiece thickness	mm	350
Maximum electrode weight	kg	50kg
Spindle head stroke	mm	60	AKM Japan V-track
Spindle head servo motor		Yamayo	818L
Spindle rotation angle	degrees	5 degrees left and right, 90 degrees front and rear
Electric Cabinet	A	75A
Minimum current	A	0.5A
Machine size (length*width*height)	mm	2300*1200*1850
Total machine weight	T	2.7